Capacity Purpose Principles of Crude Oil Distillation
|Terms of Trade:||FOB,CFR,CIF|
|Min. Order:||1 Set/Sets|
|Delivery Time:||15-20 Days|
|Place of Origin:||Shangqiu city, Henan Province,China|
|Supply Ability:||10 sets per month|
|Certificate:||ISO, CE, SGS|
|Port:||Qingdao Port,Lianyungang Port,Shanghai Port|
Model No.: LL
Capacity of Crude Oil Distillation Machine we can do is from 5TPD to 300 TPD, Purpose of Crude Oil Distillation Machine is to get Gases, Naphtha,Gasoline, Kerosene, Diesel, Lubricants, heavy Fuel Oil and Bitumen Asphalt from Crude Oil.
1. The name of machine:
Continuous Crude Oil Refinery Machine
2. The Production technology:
(1) Adopt the new technology of high vacuum, atmospheric pressure reduction, catalytic pyrolysis and distillation.
(2) Special catalyst , filter composite material.
(3) Continuous working.
3. The brief introduction of the machine:
The machine is distillate diesel and gasoline by using crude oil . the main configuration device; pretreatment reactor, horizontal rotary heating furnace, atmospheric fractionating tower, condenser, cooling water tank, oil-water separator, filter , refining filter system; heating system; distillation system;cooling system, vacuum and exhaust gas recycling system; smoke and dust removal system; fire safety, explosion-proof, electrostatic grounding system; recycling water treatment system; control system. The machine is heated by horizontal rotary heating furnace and can be continuously manufactured with capacity from 5ton/day to 100ton/day(according to customer demand, production line can be customized).
4. The flow chart and 3D drawing.
5. Brief introduction of technological process:
Pump crude oil into the pretreatment tank through oil pump, then adding flocculant and other additives for removing water, impurity and colloid. Open air compressor, Injected compressed air into pretreatment reactor tank for mixing oil. stirring intensity by the compressed air control valve control, At same time open pretreatment heating circulating oil pump, the crude oil in the reactor tank is delivered to the waste heat energy processor for heating by exchange heating. the crude oil circulation heating gradually to 40-80℃, with heating with stirring, stirring time is 40-60 mins, after static precipitation 3-4 hours, then remove water and slag. The water and slag will be transported to the sewage treatment plant for special treatment, the water (after treatment) will be used for cooling water recycling again. The slag(after treatment ) will be dryout do make ash brick materials. The crude oil (after treatment) was added to the liquid pyrolysis catalyst, and then stirred and heated for 30 mins. The temperature was increased to 40-80℃.
The crude oil will be transported into the 1# horizontal rotary heating furnace by using oil pump, At the same time open heating system equipment (oil burners, natural gas burners etc..) start heating pyrolysis distillation, when heated gradually to reach 120 - 360 ℃ each fraction temperature, each fraction of gas into high efficiency atmospheric fractionating tower CT-101 for fractionation. Tower top oil gas into the reflux tank, gas go into the combustible gas pipeline; tower set two siding exits : first is light diesel oil, second is diesel. Enter into the condenser --cooling tank -- go into oil-water separator - go into the middle oil tank (light diesel ,diesel) - through oil pump go into refining filter for filtering -- into end middle oil tank (light diesel, diesel).
Waste gas recovery and utilization: non-condensable combustible gas into exhaust pipe, through two stages filtration waste gas treatment vacuum tank connected fractionator tower top reflux tank to combustible gas pipe network, together delivery to the combustible gas fire retardant storage cabinet, then enters the furnace combustion chamber burning instead of fuel. Not only energy saving and environmental protection.
6. Why Choose Us
A. 10 Years Manufacturing Experience.
B. Exported machine to more than 50 countries.
C. Free Installation, Debugging and Training.
D. 2 Years Warranty for whole set machine and lifetime maintainance.
E. Alloy Steel material ensure the whole machine life ≥10 Years.
F. The liftetime free wearing parts.
G. The machine not make any pollution.
8. Customer Visiting
We, Yilong Machinery, Dominated in Recycling various solid waste to be oil or diesel since 2008. Our production as below: Crude Oil Distillation Machine, Waste Engine Oil Distillation Machine,Tyre Oil Distillation Machine, Plastic Oil Distillation Machine,Tyre Pyrolysis Machine,Plastic Pyrolysis Machine,etc... We have exported our machines to more than 50 countries, help customer making huge profit and got good evaluations from worldwide customer. Welcome your visit and looking forward to our earlier cooperation.
Shangqiu Zhongming Eco-Friendly Equipment Co., Ltd.
Shangqiu Zhongming Eco-Friendly Equipment Co.,Ltd , is a modern comprehensive enterprise specializing in R & D & production, factory total area 28000 square meters.
Zhongming has passed the ISO certificate and CE certification,our company has 5 R&D engineers , and 19 technical personnel. Workshop has 25 workers as our manufacturing and inspection team.
We focus in manufacturing Pyrolysis machine and Oil Distillation machine, Quality and service is our company`s pursuit of purpose, products have been exported to more than 50 countries, served more than 500 customers, by the majority of customers praise, and look forward to the future to serve more customers.
"Quality is our company culture." Our machines are environmental and have CE, ISO and oil testing report by SGS testing center, without any pollution.
- Company Name: Shangqiu Zhongming Eco-Friendly Equipment Co., Ltd.
- Representative: LUFAN KONG
- Product/Service: Tyre Pyrolysis Machine , Plastic Pyrolysis Machine , Tyre Recycling Machine , Crude Oil Distillation Machine , Used Engine Oil Distillation Machine , Rubber Recycling Machinery
- Capital (Million US $): 1,000,000 RMB
- Year Established: 2019
- Total Annual Sales Volume (Million US $): Above US$100 Million
- Export Percentage: 31% - 40%
- Total Annual Purchase Volume (Million US $): US$10 Million - US$50 Million
- No. of Production Lines: above 20
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: NO.2,Yilong Industrial Park,West Bayi Road,Pingyuan Sub-district Office, Liangyuan District, Shangqiu, Henan
- Contact Person: Ms. Nancy Si
- Tel: 86-370-2940008
Premium Related Products